Technical Information

  • Inflator:
    • K style with brass buttons
    • Low profile 16" oval-shaped hose
    • Safety cable to prevent hyper-extension
    • Positioned off-center so as not to interfere with regulator 1st stage
  • Dump Valve
    • Low profile flat valve
    • Positioned in front, lower-left side
  • Tank Stabilizer Bars
  • Drains
    • 2 large drain grommets
    • Center mesh drain panel
  • The 30lb and 40lb wings are able to accept an optional Retractor Kit, P/N: 388300
  • Materials:
    • Exterior: 1000D Armorshield Cordura
    • Inner air cell: 22mil (.022) thick black urethane