Technical Information

  • Inflator:
    • K style with brass buttons
    • Low profile 16" oval-shaped hose
    • Safety cable to prevent hyper-extension
    • Positioned on the top, back, center so as not to interfere with the cylinder manifold
  • Dump Valve
    • Low profile flat valve
    • Positioned in front, lower-left side
  • High-efficiency drains to drain water quickly
  • Access zipper is located on front side to prevent abrasion from cylinders and tank bands
  • Able to accept an optional Retractor Kit, P/N: 388300
  • Center foot print matches the Apeks plate.
  • 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts.
  • Materials:
    • Exterior: 1000D Armorshield Cordura
    • Inner air cell: 22mil (.022) thick black urethane Zipper: heavy duty YKK #10 plastic zip and slide